Mount CZ600 Weaver 2-pc, 34 mm, height 34 mm

Weaver scope mount:
Unscrew the scope ring screws and remove the upper parts of the scope rings. Loosen the mounting screws and attach the scope mount on weaver rail. Push on the scope mount in the direction of fire so that the recoil lug touches the weaver rail in its corresponding slot and tighten the mounting screws. Insert the riflescope set to maximum magnification into the scope mount, attach the upper parts of the scope rings and very gently tighten the scope ring screws so that you can correct the riflescope position. Adjust the riflescope position to a distance so that you can see a clear image in the eyepiece. Align the reticle vertivally by turning the scope around its axis. After the alignment, tighten the scope ring screws in cross order so that the tightening is even. The riflescope must be clamped by the riflescope tube, other parts of the scope must not touch the rifle or scope mount.