Mount CZ600 Weaver 1-pc, 34 mm, height 34 mm

Unscrew the scope ring screws and remove the upper parts of the scope rings. Place the scope mount on the rifle receiver and tighten the mounting screws. Insert the riflescope set to maximum magnification into the scope mount, attech the upper parts of the scope rings and very gently tighten the scope ring screws so that you can corrcet the riflescope position. Adjust the riflescope position to a distanceso that you can see a clear image in the eyepiece. Align the reticle vertically by turning the scope around its axis. After the alignment tihten the scope ring screwsin cross order so that the tightening is even. The riflescope must only be clamped by the riflescope tube, other parts of the scope must not touch the rifle or scope mount.